Skip to content

Federal Grant Procurement: 5 Methods Under 2 CFR 200.320

Updated 14 official sources

Quick Answer: 2 CFR 200.320 (opens in a new tab) sorts grant purchases into informal methods (micro-purchases, then simplified acquisitions with quotes), formal methods (sealed bids or proposals)…

Full answer and how we checked it

2 CFR 200.320 (opens in a new tab) sorts grant purchases into informal methods (micro-purchases, then simplified acquisitions with quotes), formal methods (sealed bids or proposals), and noncompetitive procurement, which 200.320(c) allows in only five cases. If you're setting thresholds for a policy, the federal defaults come from 48 CFR 2.101 (opens in a new tab): $15,000 for micro-purchases and $350,000 for the simplified acquisition threshold, both effective October 1, 2025. You may set lower ones, self-certify a micro-purchase threshold up to $50,000 each year, or ask your cognizant agency for indirect costs to approve one above $50,000. Grantsights checked 2 CFR 200.320 and FAR 2.101 on eCFR on November 9, 2026.

Data note: Checked July 26, 2026 against OMB's 2024 final guidance (opens in a new tab) for 2 CFR 200.318 through 200.320. The default FAR-linked thresholds, a documented higher micro-purchase threshold, a recipient's own procedures, state or tribal rules, and award-specific conditions can produce different procurement steps.

In this guide

Free post-award templates

Budget change prior-approval check (Excel)

It walks the ten changes in 2 CFR 200.308(f) that need written approval, plus the 10% transfer test.

Download the budget change approval check (Excel)

Want the other three too? Personnel activity (effort) record, Drawdown reconciliation log, Indirect cost (MTDC) calculator.

Free. Built from the 2024 Uniform Guidance (2 CFR 200); your award terms and your own policies still come first. We'll also tell you once if we release a fuller post-award pack.

MethodFederal default rangeWhat 2 CFR 200.320 requires
Micro-purchase$15,000 or lessNo quotes needed when the price is reasonable and documented; spread purchases among qualified suppliers when practicable
Simplified acquisitionOver $15,000, up to $350,000Price or rate quotes from an adequate number of qualified sources
Sealed bidsOver $350,000Public notice, firm fixed price, award to the lowest responsive, responsible bidder; preferred for construction
ProposalsOver $350,000Public notice, stated evaluation factors, award to the most advantageous offer on price and other factors
Noncompetitive, 200.320(c)Any amount, if one case applies(1) at or under the micro-purchase threshold, (2) single source, (3) public exigency or emergency, (4) your written request approved in writing by the federal agency or pass-through entity, (5) competition inadequate after soliciting several sources

For a live award, find the program and its terms in the free grant search before applying these defaults, since award conditions can be stricter.

Procurement is where federal grant compliance gets real. Every time you buy something with grant funds, whether it's a $200 box of lab supplies or a $2 million construction contract, you're subject to federal procurement standards that dictate how you solicit vendors, evaluate proposals, document your decisions, and award contracts.

The rules live in 2 CFR 200.317 through 200.327 (opens in a new tab), and they apply to every non-federal entity that spends federal award funds on goods and services. Procurement findings are among the most common results in Single Audits, according to the Federal Audit Clearinghouse, because the rules are detailed, the documentation requirements are specific, and many organizations don't have procurement systems designed with federal compliance in mind.

This guide covers current procurement methods, documented threshold decisions, competition, domestic preference, and procurement records.

Who These Rules Apply To (And Who Gets an Exception)

The procurement standards in 2 CFR 200.318-327 apply to every non-federal entity that receives federal financial assistance, with one major exception.

States Follow Their Own Rules

Under 2 CFR 200.317 (opens in a new tab), states must follow the same policies and procedures they use for procurements from non-federal funds. In other words, state agencies use their own state procurement codes when spending federal grant dollars, not the federal rules in 200.318-327. However, states must still comply with specific requirements like ensuring contractors aren't debarred and following any program-specific procurement conditions.

Everyone Else Follows Federal Rules

Local governments, tribal organizations, universities, hospitals, and nonprofits must follow the federal procurement standards in 2 CFR 200.318-327. These organizations need documented procedures consistent with the federal standards. They can use a lower threshold, and 2 CFR 200.320 also permits a documented higher micro-purchase threshold in specified circumstances, including annual self-certification up to $50,000 under the rule's conditions.

Subrecipients and Pass-Through Requirements

If you're a pass-through entity making subawards, your subrecipients must also follow these procurement standards. Under 2 CFR 200.332 (opens in a new tab), you're responsible for monitoring subrecipient compliance, including procurement procedures. The subrecipient monitoring guide lists every 200.332 duty.

For the awards you already manage

Yearly plan

Grantsights Pro

$199a year

About $16.58 a month, or $24 month to month

Every award's report due dates and tasks in one place, with reminders before each date.

  • Each award's report due date, amount and next step
  • Task reminders 30, 14 and 3 days before each date, and a calendar feed
  • Up to 3 people on one plan

What a Threshold Table Doesn't Tell You: Procurement-Route Screen

The threshold is only one decision. It does not establish the recipient's approved procedure, determine whether a state or tribal rule applies, turn a subaward into a contractor purchase, or cure a missing competition record. The hard truth is that a purchase can be under a valid threshold and still fail because the file does not show price reasonableness, selection rationale, or the right relationship.

DecisionCurrent ruleFile to check before soliciting
Micro-purchase thresholdDefault is tied to the FAR; a documented higher threshold can be available under 2 CFR 200.320 conditionsWritten procedures, current FAR value, self-certification or cognizant-agency approval, and award terms
Simplified acquisitionInformal procurement uses price or rate quotations from an adequate number of qualified sourcesRecipient threshold and documented solicitation method
Formal procurementSealed bids or proposals are used above the applicable simplified acquisition thresholdCurrent threshold, notice, specifications, and evaluation plan
Noncompetitive routePermitted only for the listed 2 CFR 200.320(c) circumstancesWritten justification, market research, and any needed authorization

Grantsights analysis of the 2 thresholds and 5 noncompetitive cases in the current rule shows that the best first action is to write the route decision before the purchase request is approved. An otherwise reasonable $40,000 purchase becomes difficult to defend when the file never records why its micro-purchase, informal, formal, or noncompetitive route applied.


Looking for your next grant?

About once a week, we email a short list of open grant calls with real deadlines from different funders. It lists open calls only.

No spam. Unsubscribe anytime.

The 5 Procurement Methods Under 2 CFR 200.320

The Uniform Guidance establishes five procurement methods, organized by dollar amount and competitive requirements. The thresholds were updated by the FAR inflation adjustment effective October 1, 2025, as announced in the Federal Register (opens in a new tab) and confirmed by GSA SmartPay (opens in a new tab).

Method 1: Micro-Purchase (At or Below the Applicable Threshold)

Micro-purchases are the simplest procurement method. For purchases at or below the applicable micro-purchase threshold, you do not need to solicit competitive price or rate quotations, but you must maintain support for the reasonable-price conclusion. The default threshold is tied to the FAR, and a documented higher threshold can be available under 2 CFR 200.320.

Key requirements:

  • The price must be reasonable (not necessarily the lowest, but not inflated)
  • You can't split purchases to stay under the threshold (that's called "splitting" and it's a common audit finding)
  • You should rotate vendors to the extent practical rather than always buying from the same supplier
  • Maintain records of the purchase for audit documentation

Method 2: Simplified Acquisition (Above the Applicable Micro-Purchase Threshold)

For purchases above the applicable micro-purchase threshold and at or below the applicable simplified acquisition threshold, obtain price or rate quotations from an adequate number of qualified sources. The regulation does not set a universal number of quotes, so document why the sources and solicitation method were adequate for the transaction.

Key requirements:

  • Solicit quotes from an adequate number of qualified sources
  • Document the quotes received and the basis for selection
  • Award to the vendor whose quote is most advantageous considering price and other evaluation factors
  • Maintain all solicitation documents, quotes received, and the selection rationale

Previous threshold: $250,000 (awards issued before October 1, 2025)

This is the method most grant recipients use most frequently, because the majority of grant purchases fall in this dollar range.

Method 3: Sealed Bids (Above the Applicable Simplified Acquisition Threshold)

Sealed bidding is a formal procurement method best suited for construction contracts and other procurements where the requirements can be defined precisely and price is the primary evaluation factor. A sealed bid process requires:

  1. Public advertisement of the solicitation with enough lead time for bidders to prepare
  2. Complete specifications that allow bidders to price the work accurately
  3. Bid opening at the time and place stated in the invitation (local governments must open bids publicly)
  4. Award to the lowest responsive and responsible bidder
  5. A documented justification for every bid you reject

Sealed bidding works when the specifications are clear enough that all bidders are pricing the same thing, making price the only differentiator. It's the preferred method for construction projects, where designs and specifications can be precisely defined.

Method 4: Competitive Proposals (Above the Applicable Simplified Acquisition Threshold)

Competitive proposals (also called RFP-based procurement) are used when sealed bidding isn't appropriate, typically for professional services, research services, IT systems, or any procurement where qualitative factors matter alongside price.

Key requirements:

  • Public advertisement of the Request for Proposals (RFP)
  • Clear evaluation criteria disclosed in the solicitation, including their relative importance
  • Independent evaluation of proposals by qualified reviewers
  • Award to the most advantageous proposal considering price and other factors listed in the solicitation
  • Written evaluation and selection documentation

Unlike sealed bidding, competitive proposals allow negotiation with offerors and don't require public opening. The evaluation can consider technical approach, qualifications, past performance, and other factors in addition to price.

Method 5: Noncompetitive / Sole Source

Noncompetitive procurement is the exception, not the rule. Under 2 CFR 200.320(c), you can use sole source procurement only when one of these five conditions applies:

  1. Micro-purchase: The aggregate amount is at or under the micro-purchase threshold
  2. Single source: The item or service is available from only one source
  3. Public exigency or emergency: An urgent need that won't permit the delay of a public competitive notice
  4. Written approval: You request noncompetitive procurement in writing and the federal agency or pass-through entity approves it in writing
  5. Inadequate competition: After soliciting several sources, competition is determined to be inadequate

Documentation is critical. Every sole source procurement must include a written justification explaining which condition applies and why competition wasn't feasible. "We've always used this vendor" and "they gave us a good price" are not acceptable justifications.

For sole source procurements based on single-source availability, your justification should explain what makes this vendor unique, what market research you conducted to confirm no alternatives exist, and why the requirement can't be modified to allow competition.


Full and Open Competition: The Default Standard

The overarching principle of federal grant procurement is full and open competition. Under 2 CFR 200.319 (opens in a new tab), all procurement transactions above the micro-purchase threshold must be conducted in a manner providing full and open competition, consistent with the standards in 2 CFR 200.320.

Practices That Restrict Competition (And Aren't Allowed)

The regulation specifically prohibits these practices:

  • Unreasonable requirements placed on vendors to qualify for the competition
  • Unnecessary experience or excessive bonding requirements
  • Organizational conflicts of interest that give one vendor an unfair advantage
  • Brand-name specifications without allowing "or equal" alternatives
  • Geographic preferences (with limited exceptions for architecture and engineering services)
  • Arbitrary actions in the procurement process

What Full and Open Competition Looks Like

For procurements above the micro-purchase threshold, full and open competition means:

  • The solicitation is available to any qualified vendor
  • Specifications describe what you need functionally rather than pointing to a specific brand
  • Evaluation criteria are disclosed before vendors submit their offers
  • All responsive proposals are evaluated against the same criteria
  • The award decision is documented and defensible

Conflict of Interest Requirements

Under 2 CFR 200.318(c) (opens in a new tab), you must maintain written standards of conduct covering conflicts of interest for employees engaged in the selection, award, and administration of contracts supported by federal awards.

What the Standards Must Cover

Your conflict of interest policy must address situations where:

  • An employee, officer, or agent involved in procurement has a financial or other interest in a vendor
  • An employee's family member or close associate has a financial interest in a vendor
  • An employee solicits or accepts gifts, gratuities, favors, or anything of monetary value from contractors or potential contractors

Penalties for Violations

Employees or officers who violate your conflict of interest standards must be subject to disciplinary actions. The regulation doesn't prescribe specific penalties, but your policy should. Common consequences include removal from the procurement process, formal reprimand, and in serious cases, termination.

Practical Implementation

Require all employees involved in procurement to sign annual conflict of interest disclosure forms. Before starting any procurement over the simplified acquisition threshold, have evaluators sign specific certifications confirming they have no conflicts related to the vendors being considered. The federal grant conflict of interest guide covers the separate disclosure duty to the awarding agency.


Documentation Requirements: What Auditors Want to See

Under 2 CFR 200.318(i), you must maintain records sufficient to detail the history of each procurement. For grant compliance purposes, think of your procurement file as telling the complete story of why you bought what you bought, from whom, and at what price.

For Every Procurement (Regardless of Method)

  • Description of what was purchased and why it was needed for the grant
  • Method of procurement used and why that method was appropriate
  • Basis for the contract price (how you determined it was reasonable)
  • Documentation that the contractor isn't suspended or debarred (SAM.gov check)

For Competitive Procurements (Small Purchase and Above)

  • The solicitation document (RFQ, RFP, or IFB)
  • List of vendors solicited and method of solicitation
  • All quotes or proposals received
  • Evaluation criteria and how they were applied
  • Scoring sheets or evaluation memos
  • The award decision memo explaining the selection
  • The executed contract or purchase order

For Sole Source Procurements

  • Written justification identifying which condition in 2 CFR 200.320(c) applies
  • Market research documenting the absence of competition
  • Cost or price analysis demonstrating the price is fair and reasonable
  • Written approval from the federal agency or pass-through entity (if that is the condition used)

Retention Period

All procurement records must be retained for at least three years after submission of the final financial report under 2 CFR 200.334. If there's an unresolved audit finding related to the procurement, records must be kept until the finding is resolved. The records retention guide covers the other exceptions to that 3-year clock.

For related guidance on allowable costs and documentation, see our allowable costs guide.


Domestic Preference: Build America, Buy America

The Build America, Buy America Act (BABA), enacted as part of the Infrastructure Investment and Jobs Act in November 2021, added a domestic content requirement that applies to many federal financial assistance programs.

What BABA Requires

For federally funded infrastructure projects, all iron, steel, manufactured products, and construction materials must be produced in the United States. The requirement is codified in 2 CFR Part 184 (opens in a new tab) and applies to:

  • Iron and steel products (must be manufactured in the U.S.)
  • Manufactured products (must be manufactured in the U.S., with over 55% of component costs from domestic sources)
  • Construction materials (must be manufactured in the U.S.)

When BABA Applies

BABA applies to federal financial assistance awards for infrastructure, which broadly includes projects involving the construction, alteration, maintenance, or repair of infrastructure in the United States. This captures many grant-funded construction and renovation projects, but doesn't typically affect equipment purchases or professional services.

Available Waivers

Three types of waivers exist under BABA:

  1. Public interest waiver: Applying the domestic preference would be inconsistent with the public interest
  2. Nonavailability waiver: The required materials aren't produced domestically in sufficient quantity or quality
  3. Unreasonable cost waiver: Using domestic materials would increase the overall project cost by more than 25%

Federal agencies must publish proposed waivers for at least 15 days of public comment before finalizing them, according to the Department of Energy BABA guidance (opens in a new tab).

Beyond BABA: 2 CFR 200.322

Even before BABA, 2 CFR 200.322 required non-federal entities to provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States when using federal financial assistance funds. This is a broader but less prescriptive requirement than BABA. It doesn't require domestic sourcing, but it requires you to prefer it when practical.


Suspension and Debarment Checks: SAM.gov Verification

Before awarding any contract or subaward with federal funds, you must verify that the vendor or subrecipient isn't suspended, debarred, or otherwise excluded from participating in federal programs. This check is required under 2 CFR 200.214 and the government-wide nonprocurement debarment rules in 2 CFR Part 180.

How to Check SAM.gov

  1. Go to SAM.gov (opens in a new tab)
  2. Go to the Exclusions search
  3. Search by the entity's name, DUNS number, or UEI
  4. Verify the entity doesn't appear on the exclusion list
  5. Print or save the search results for your procurement file

When to Check

Check SAM.gov before every contract award or subaward, regardless of dollar amount. Some organizations also check at contract renewal and before exercising option years. For ongoing relationships, periodic verification (at least annually) is a best practice.

Consequences of Awarding to an Excluded Entity

If you award federal funds to a suspended or debarred entity, the costs may be disallowed. This means you'd have to repay the federal government from your own funds. It can also trigger a finding in your Single Audit, which could lead to additional monitoring conditions on your awards.

For more detail on SAM.gov and the registration process, see our SAM.gov registration guide.


Subrecipient vs. Contractor Determination

One of the most consequential procurement decisions you'll make is whether a third-party relationship is a subaward (to a subrecipient) or a contract (with a contractor). The classification determines which rules apply, what monitoring is required, and how the transaction flows through your procurement system.

Key Differences Under 2 CFR 200.331

Subrecipient characteristics:

  • Determines who's eligible to receive federal assistance
  • Has performance measured against program objectives
  • Makes programmatic decisions
  • Is responsible for adhering to federal program requirements
  • Carries out a public purpose specified in the authorizing statute

Contractor characteristics:

  • Provides goods and services within normal business operations
  • Provides similar goods/services to many different purchasers
  • Operates in a competitive environment
  • Provides goods/services ancillary to the federal program
  • Is not subject to federal program compliance requirements

Why It Matters for Procurement

Contracts with contractors follow the procurement standards in 2 CFR 200.318-327 (the rules covered in this guide). Subawards to subrecipients follow the subaward requirements in 2 CFR 200.332, which include different monitoring obligations, flow-down of federal award terms, and Single Audit requirements for subrecipients spending $1 million or more in federal awards.

Misclassifying a subrecipient as a contractor (or vice versa) can result in audit findings for failure to monitor subrecipients, failure to flow down required terms, or procurement violations.

For more on subaward requirements, see our guide on what is a subaward.


Common Procurement Audit Findings

Based on Single Audit reports and OIG reviews, these are the procurement findings that appear most often across federal grant recipients.

1. Failure to Obtain Competitive Quotes

The single most common procurement finding. Organizations purchase goods or services above the micro-purchase threshold without soliciting the required number of quotes. This happens especially with professional services, IT purchases, and sole-source procurements that lack adequate justification.

2. Inadequate Procurement Documentation

Having competitive quotes but failing to document the evaluation process, the selection rationale, or the basis for the contract price. Auditors need to see the complete procurement story in your files, not just the winning quote.

3. Split Purchases to Avoid Thresholds

Breaking a single procurement into multiple smaller purchases to stay below the micro-purchase or simplified acquisition threshold. Auditors look for patterns: multiple purchase orders to the same vendor for related items within a short time period are red flags.

4. Missing SAM.gov Debarment Checks

Awarding contracts without verifying the vendor's exclusion status on SAM.gov, or failing to document the verification in the procurement file. This is one of the easiest requirements to comply with and one of the most commonly missed.

5. Conflicts of Interest

Awarding contracts to vendors with personal or financial relationships to employees involved in the procurement decision, without disclosure or recusal. Even the appearance of a conflict can trigger a finding.

6. Sole Source Without Adequate Justification

Using noncompetitive procurement without meeting one of the five conditions in 2 CFR 200.320(c), or meeting a condition but failing to document the justification adequately. "We've used this vendor before" doesn't qualify as a sole source justification.

7. Brand-Name Specifications

Writing solicitation specifications around a specific product or brand without allowing "or equal" alternatives, which effectively eliminates competition and violates 2 CFR 200.319.


Building a Compliant Procurement System

Written Procurement Procedures

Your organization must have documented procurement procedures that comply with 2 CFR 200.318-327. These procedures should cover each procurement method, dollar thresholds, approval authorities, documentation requirements, and conflict of interest standards. The procedures should be readily accessible to everyone who makes purchases with federal funds.

Training for Purchasing Staff

Everyone who buys things with federal grant money needs to understand the procurement standards. Annual training should cover the five procurement methods, threshold amounts, documentation requirements, and common audit findings to avoid.

Internal Review Process

Implement a pre-award review for procurements above certain dollar thresholds. Many organizations require sponsored programs office review for any procurement over $25,000 on a federal award. This catches compliance issues before the purchase is made, when they're easy to fix.

Technology Support

Use a procurement system that enforces federal requirements: tracking quotes received, maintaining evaluation documentation, automating SAM.gov checks, and flagging purchases that might require a different procurement method based on dollar amount.


FAQ: Common Questions

What are the procurement thresholds for federal grants in 2026?

Start with the current FAR-linked default thresholds, then check whether the recipient has a documented higher micro-purchase threshold under 2 CFR 200.320, whether a state or tribal procedure applies, and whether the award adds a condition. At or below the applicable micro-purchase threshold, document price reasonableness. Above that threshold and at or below the applicable simplified acquisition threshold, obtain quotations from an adequate number of qualified sources. Above the applicable simplified acquisition threshold, use formal methods. The regulation does not set a universal quote count.

When can I use sole source procurement on a federal grant?

Noncompetitive (sole source) procurement is allowed under 2 CFR 200.320(c) only when one of these five conditions applies: (1) the purchase is at or under the micro-purchase threshold, (2) the item or service is available from only a single source, (3) a public exigency or emergency won't permit the delay of a public competitive notice, (4) you request it in writing and the federal agency or pass-through entity approves it in writing, or (5) after soliciting several sources, competition is determined inadequate. You must document the justification in writing, explaining which condition applies and why competitive procurement isn't feasible. Sole source procurements are among the most scrutinized items in grant audits, so the documentation must be thorough and specific to the procurement, not generic.

Do I have to check SAM.gov before awarding a contract with federal grant funds?

Yes. Under 2 CFR 200.214 and the government-wide nonprocurement debarment and suspension rules (2 CFR Part 180), you must verify that any contractor or subrecipient receiving federal grant funds isn't suspended, debarred, or otherwise excluded from participating in federal programs. The verification is done through SAM.gov's exclusion search function. You should check SAM.gov before awarding any contract or subaward and retain a printout or screenshot of the search results in your procurement file. Awarding funds to a suspended or debarred entity can result in disallowed costs and a finding in your Single Audit, which can lead to additional monitoring conditions on all your federal awards.

What procurement documentation do I need to keep for federal grant purchases?

Under 2 CFR 200.318(i), you must maintain records sufficient to detail the history of each procurement. At a minimum, this includes the rationale for the method of procurement used, the selection of contract type, the contractor selection or rejection criteria, and the basis for the contract price. For competitive procurements, keep all solicitation documents, quotes or proposals received, evaluation criteria and scoring documentation, the award decision memo, and the executed contract. For sole source procurements, include the written justification with the specific condition that applies. All procurement records must be retained for at least three years after submission of your final financial report per 2 CFR 200.334.

What is the Build America Buy America requirement for federal grants?

The Build America, Buy America Act (BABA), enacted as part of the Infrastructure Investment and Jobs Act in November 2021, requires that all iron, steel, manufactured products, and construction materials used in federally funded infrastructure projects be produced in the United States. The requirement is codified in 2 CFR Part 184 and applies to federal financial assistance awards for infrastructure projects, broadly defined as construction, alteration, maintenance, or repair of infrastructure. Waivers are available when domestic preference would be inconsistent with the public interest, when domestic products aren't available in sufficient quantity or quality, or when using domestic materials would increase overall project costs by more than 25%. Agencies must publish proposed waivers for at least 15 days of public comment before finalizing them.


Sources

  1. 2 CFR 200.317-327 - Procurement Standards (opens in a new tab) - The complete federal procurement standards for non-federal entities receiving federal financial assistance.
  2. 2 CFR 200.320 - Procurement Methods (opens in a new tab) - Detailed requirements for each of the five procurement methods.
  3. Federal Register - FAR Inflation Adjustment of Acquisition-Related Thresholds (2025) (opens in a new tab) - The official notice updating micro-purchase and simplified acquisition thresholds effective October 1, 2025.
  4. GSA SmartPay Bulletin - Micro-Purchase Threshold Increase (opens in a new tab) - GSA guidance confirming the new $15,000 micro-purchase threshold.
  5. 2 CFR Part 184 - Buy America Preferences for Infrastructure Projects (opens in a new tab) - The regulatory framework implementing Build America, Buy America requirements for federal financial assistance.
  6. 2 CFR 200.331 - Subrecipient and Contractor Determinations (opens in a new tab) - Federal guidance on distinguishing between subrecipients and contractors.

Last updated November 9, 2026. Corrected November 9, 2026: what changed. Published by Grantsights from public sources. See our editorial policy, how we build and check guides, corrections and how we make money.